Home » Beauty » How to make a creative feather hat. Paper hat - step-by-step instructions on how to make a headdress with your own hands (115 photo ideas). Necessary materials for making a hat

How to make a creative feather hat. Paper hat - step-by-step instructions on how to make a headdress with your own hands (115 photo ideas). Necessary materials for making a hat

- we present to you step-by-step master class with photos and explanations for making a decorative elegant hat from threads.

This hat can be used to complete carnival and concert costumes, wedding hairstyles, ceremonial images and much more.

This one is beautiful and elegant DIY hat will not require you to spend a lot of time and money on materials. Also, to make this model you will not need any special skills or knowledge. Just be patient and follow the instructions below.

DIY hat: materials

In order to make such a beautiful hat yourself, you will need:

2-3 reels simple threads(you choose the color at your discretion).
Gelatin or clear craft glue (PVA). If you use gelatin, be sure to soak it in water first.
Ball.
To finish and decorate the hat we will need:
Bias tape.
Fatin.

DIY hat: how to make

We start by taking measurements from the head. Then we inflate the balloon until it is equal in girth to the girth we have obtained of the head on which the hat will sit.

Next step: wrap the ball very tightly with threads soaked in glue or gelatin.

The next step in the manufacture of the product " DIY hat “: — leave the ball with the threads until the gelatin or glue dries completely.

After this, carefully release the air from the ball and remove it from the starched sphere of thread. We must cut the sphere in half and crush it on top to give it a “tablet” shape.

The edge of the hat needs to be carefully processed with bias tape so that the threads do not fray over time and the hat with your own hands looks aesthetically pleasing.

Approximate dimensions of a DIY pill hat.

Naturally, such a pillbox hat requires additional decorations. You can decorate your hat with your own hands using flowers from satin ribbons or lace. By the way, we have wonderful ones made from a variety of materials.

Also, one for celebrations and carnivals can be decorated with butterflies and sparkles, beads and feathers, and so on.

The “Autumn Hats Parade” took place in Simferopol. Hat competition in kindergarten took place in all age groups Oh. Parents really liked the idea of the competition, and many expressed a desire to take part in it and compete for the title of the author of the best autumn hat.

Parents of preschool children and the children themselves approached the creative task with full responsibility. There were all sorts of hats here: hats with sewn-on dummies of fruits, vegetables, leaves; and hats made from waste material; and flirty headdresses knitted by the caring hands of mothers. There were even hats in which, thanks to plasticine, it was possible to embody a certain plot on an autumn theme.

The hat competition in kindergarten took place in several stages.

Stage 1 - organizing an exhibition of works by parents and children.

Stage 2 - hat competition in kindergarten in your age group.

The nominations included “the most beautiful”, “the most unusual”, “the most fun”, “the most chic” and others. This stage of the competition was carried out through entertainment carried out in each group. Present at the celebration were: leaders preschool, duu specialists (competition jury), employees, children of other age groups of their choice and some parents.

Preschool children in their beautiful headdresses sang, danced, played relay races, and fairy-tale characters came to visit them.

At the end of the competition, each child’s hat was appreciated (of course, everyone got into some category). The jury members congratulated and presented gifts to the children.

Each group had its own entertainment scenario and organization.

Stage 3 - photo session with children in hats.

Stage 4 - holding the festival “Fall of Autumn Hats”.

Guests of the Improvement Institute were present at the fashion show. Children from the older group took part in the fashion show. The holiday ended with a wonderful dance, during which preschoolers demonstrated all the beauty of their creative works.

At the end of the project, some of the hats remained in the kindergarten. They still serve as decoration for the kindergarten.

Watch video:

Part 1

part 2

Part 3

We thank Elena Beridze for the material provided.

Project organizers: head of the preschool educational institution Ivanichenko Natalya Evgenievna, teacher-methodologist Elena Grigorievna Mudritskaya, music director Tatyana Vladimirovna Barteneva, choreographer Natalya Valerievna Balandina.

In families with children, parents become real inventors and craftsmen, even if before they could not thread a needle. The child always needs to be busy with something, you have to spend a lot of time with him. As they grow up, they become curious and want to know everything, and here you have to teach the child what he himself couldn’t do before. Let's learn and find out how to make hats with your own hands to various events.

Making a hat at home is not that difficult, especially since it can be made from a wide variety of materials:

cardboard
paper
textile
plastic
dry leaves
leather, etc.

Very often, a child needs a certain headdress for a matinee. The parent understands that buying a ready-made one is quite expensive, and there is no point, because it will only be useful once. In this case, ingenuity comes to the rescue, because you can make a hat from ordinary paper and we’ll find out how to do it right now.

So, you need a beautiful and neat cap-shaped hat, then the following “tools” may be useful to you to make it:

two album sheets
your neatness

The manufacturing instructions are simple, the result is a clear and neat cap:

put one album sheet on top of another
they should lie on a flat surface in a horizontal position
bend it top edge sheets (2-3 centimeters)
bend the right and left ends of the sheets so that they touch each other in the middle (like for an airplane)
fold the remaining part of the top sheet up
we fix this part on the sides, and on both sides

after that, fold the remaining part of the bottom sheet
straighten the product
The wonderful cap-shaped hat is ready.

The main advantage of this method of making this headdress is that it will not fall apart, because the edges are secured quite firmly.

How to make a top hat?

If you need to make a top hat, don’t panic, because if you tackle this matter wisely and choose the right way manufacturing, there is nothing complicated in this process. Now you can see for yourself that make a hat out of cardboard not difficult.

First, let's decide on the tools and materials that may be useful to you in the process of making the cylinder. It's all insanely simple:

a couple of sheets of colored cardboard (their size will depend on how big you want your cylinder to be)
office supplies: scissors, pencil, compass, eraser, glue
beautiful ribbon for decoration (let's make a bow out of it for the cylinder)

So, let's get to work:

On one of the sheets of cardboard, draw a circle with a compass (the diameter depends on the size of the cylinder), let's call it the initial circle, from the center of which it will be necessary to draw another circle, the size of which is slightly larger than the initial one.

On the second sheet we draw a circle similar to the original (initial circle) and after that from its center we draw another circle, the diameter of which will be twice the size of the small circle.
On the same sheet, from the same point in the center, draw a circle smaller than the initial one; it should occupy ¾ of the initial circle.

In total, on one sheet we have two circles, on the second three.

Take the first sheet (on which there are two circles) and cut out a circle (along the contour of the large one).
After this, use scissors to make a fringe around the circumference (to the outline of a small circle).
We bend the resulting fringe inward. Set aside the circle.
Take a second sheet of paper and cut it along the contour of the largest circle.
Using scissors, cut out the smallest circle from the inside.
We make a fringe with scissors from the outline of a small circle to the outline of a large circle.
We bend the fringe inward.
Now we need to cut out a segment from the remaining paper, which will be the side walls of our cylinder. In this case, the size of the cut strip should correspond to the size of the small circle on the sheet (we make the size a little larger so that there is an overlap for gluing).

Now we will work with a sheet on which we drew three circles. We smooth out the fringe on it to make it easier to lubricate with glue. After all the pieces are well coated with glue, return them to their original position (sticking up).
Now we put a cylinder made of a piece of cardboard on the coated circle with a fringe, press them well together so that the glue sets properly.
We straighten the fringe on a small circle and also coat it with glue. We straighten the fringe and put this segment on the top of the cylinder.
After the glue on the product has dried well, you can start decorating the hat, for this we will need our beautiful ribbon. It can be of any color and thickness, it depends on the taste and preferences of the manufacturer. If this cylinder is for men, you can decorate it with a black satin ribbon.
We tie a bow on the ribbon (there are many ways, so you can choose any of them), the main thing is that it is done carefully.
The ribbon can either be glued or tied in such a way that you only need to cut one of the ends. The cylinder is ready.

How to make a pirate hat?

The main attribute in a pirate's costume is his hat, so it must be made as expected. Let's figure out what you need to make your own pirate hat.

Tools:

black cardboard, A3 format (double-sided)
scissors
compass
album sheet (thin) – 3 pieces
hat elastic

Let's start making:

We make a square from A3 format.
Draw a circle with a compass (choose the largest possible diameter).
Let's cut it out.
Making white fringe. To do this, cut the album sheet into 4-5 strips and cut them into fringes.
Running scissors along the fringe, twist it.
Glue it around the entire perimeter of the circle (with PVA glue or using a glue gun).
We bend the edges of the circle so that we get a triangle, tightly pinching three edges with our fingers. For reliability, we glue them together with glue.
Now you need to make two feathers. To do this, we need to take the A4 format and fold it into rectangular strips (4 times).
Draw something like feathers on a sheet of paper, cut them out along the contour, and make a fringe with scissors.
We glue one feather on each side of the triangle we have bent.
Now you need to draw a skull, bones and a pirate hat on a sketchbook sheet. No special artistic skills are required here; we draw only contours.
Cut out the skeleton parts.
Glue them to the front of the hat.
We paint the skeleton (we draw its eyes, a bandage on one of the eyes, we draw the outline of the bones, we paint the cut out hat in red).
We thread the hat elastic so that it can stay on the head.

Now you are convinced that make a hat for a boy It’s not difficult, and with such a headdress he can’t be distinguished from a real pirate.

How to make a Dunno hat?

This hat is very easy to make, for this you will need:

paints
thick cardboard
scissors
compass

Now let's look at the process, how to make a hat step by step Dunno:

We measure the volume of the head that will wear the Dunno hat.
We divide the resulting number by 6.28 (if the volume of the head is 56 cm, divide by 6.28, we get approximately 9 cm, this is the radius of our smallest circle).
Draw a circle with a compass on thick cardboard.
The next circle should be slightly larger in diameter than the first.
The third circle is 3 times larger than the smallest one.
Place the tip of the scissors in the center of the small circle. We make a hole, from which we make four cuts in different directions to the contour of the next circle in size.
Cut out the smallest circle from the inside (the cuts are needed to make it easier to cut out a small circle).
From its contour we make a fringe to the next circle.
We lift the fringe up (as in the case of making a cylindrical hat).

Now we need to cut out the part that will serve as the cone for the hat.
To do this, we again need the head volume value (for example, 56 cm). We apply a ruler to the edge of the cardboard, mark 56 cm, add another 5 centimeters to the existing measurement (they are necessary to glue the part together).
It turns out that we will need a sheet of at least 61 cm. We measure exactly half of this size, and draw a horizontal line (the length is approximately 40 cm, if it were a clown’s cap, then a larger cone would be needed, and since we have a hat with a brim, 40 cm will be enough).
Now we need to draw a semicircle on both sides of this line. So that this process does not cause you many problems, just take a string and tie it to a pencil. With this design you can easily draw a semicircle on cardboard.
Cut out the resulting semicircle.
Roll it into a cylinder and glue both sides to each other.
After the cylinder is ready, glue the fringe on the circle and place our cylinder on it.

The resulting Dunno hat can be decorated with a felt-tip pen or paints. Great option- Cover it with fabric.

How to make a hat for a doll?

Making a doll hat is very simple. For this you can use:

small plastic cups
yogurt cups
molds for sweets, etc.

So, instructions:

We take a mold from a baby yogurt, cut it so that we only have the cone of the shape in our hands (we try it on the doll’s head).
We draw a circle on the cardboard with a compass, its diameter should be three times larger than the diameter of the mold we have chosen.
Place the yogurt mold on the cut out circle, outline it with a pencil and cut out from the inside.
We connect these two parts (a circle with a cut hole and a mold) with electrical tape or tape.
We cover the resulting hat with fabric.
We decorate with rhinestones, ribbons, beads, homemade flowers, etc.

Make a hat for a girl You can do it in the same way, but you can use larger molds for this.

We present to your attention Photos of hats made by yourself.

How to make a bottle hat?

Let's find out how easy it is make a champagne hat. We have already reviewed workshops on making:

pirate hat
cylinder
hats for dolls

In this case, you can make a hat on a bottle in a similar way (you can choose any of them). The main thing here is to correctly measure the volume of the headdress being made.

There is nothing complicated about this; the volume of the “head” in this case is the volume of the neck of the bottle. Appearance and the materials used for finishing the hat will depend solely on the capabilities and wishes of the manufacturer.

Make a baby hat with your own hands also not a problem, all the above methods are suitable for this, here, as in the previous case, the size (volume) of the head is important.

Say “I can’t, I’m not a needlewoman, I don’t have the patience!” - everyone can. The main thing in this matter is desire. This is why detailed articles are written on how to do something with your own hands and videos with handicraft master classes are created. Don’t be lazy, experiment and try, you will like it as soon as you realize that creating beauty with your own hands is very simple. Even make a cowboy hat It’s not difficult to do it yourself, you’ll see this by watching the video with detailed instructions.

Video: “How to make a cowboy hat?”

In this master class we will tell you how to make a paper hat with your own hands. Our step by step instructions with template and step by step photos process will help turn your child into the brightest character at a holiday party or children's day birth. You'll see, our paper hat will delight your baby!

Tools and materials Time: 1.5 hours Difficulty: 3/10

For the hat:

printed templates for hat and mask;
colored corrugated cardboard yellow 50 x 50 cm;
colored corrugated cardboard silver-gray 15 x 7.5 cm;
cardboard white 13 x 7.5 cm;
strip of black paper 45 x 1.3 cm;
acrylic paint in brown, black and white;
brush with a fine tip;
awl;
bone shoulder blade;
universal glue;
brush with sponge;
scissors;
black threads;
compass and ruler.

For glasses:

synthetic felt 2 mm thick, 23 x 8 cm;
white pencil;
round elastic cord 2-3 mm thick;
quick-adhesive transparent adhesive.

If holidays are coming up at your kindergarten or school, but you don’t have a suitable costume in stock, don’t worry! With the help of minimal resources that are found in almost every home, you can easily create a minion image for your child with your own hands! And our amazing paper hat will help you with this.

Step-by-step instructions with photos

This paper hat took us half a day to design, make templates and photograph the process. We think you will only need an hour and a half to create it according to our ready-made templates! As a bonus, we also provide you with a felt Minion face mask. Enjoy!

Step 1: Cut out the pieces

Download the hat and glasses template below and print on suitable construction paper.

Attach the parts from the template onto cardboard of the appropriate shade. Carefully cut out all the cardboard pieces. You can trim the minion's eyes a little around the edges like we did.

Step 2: Draw the Eyes

On the eye parts, paint the irises with dark brown acrylic paint.

Draw in the pupils and outline of the eyes with black acrylic paint.

Add highlights to your eyes using several dots acrylic paint white.

Step 3: Glue the Hat

Using a bone spatula, draw a line along the edge of the top hat piece's transition into the jagged seam allowance. Fold all seam allowances up along this line.

Fold all the seam allowances on the hat brim up.

Glue the middle piece into a cylinder. Glue the top hat over the brim of the hat.

Glue the top round part onto the cylinder.

The main part for the hat is ready. Leave the craft for a while until the glue dries.

Step 3: Glue the glasses

Glue a black glasses strap in the middle of the yellow cylinder on the hat.

Assemble the glasses by gluing the previously made eyes into the middle of the silver glasses frame. Glue glasses with eyes into the remaining space between the edges of the hat strap.

Step 4: Make hair

Cut the black yarn into equal lengths and gather the central part into a bun. Make the same number of holes in the central part of the cylinder as you have wool pieces.

Insert the yarn into the cylinder from the inside.

Cover the underside of the yarn with a layer of glue and press it to the base of the hat. This will make the hair look sharper and coarser.

Trim the hairs to a length of 2.5-4 cm. Set the hat aside for at least 2 hours to allow all parts to dry thoroughly.

Alena Sorokina

Master class« Original hat»

Good afternoon everyone! In our kindergarten there was a competition for making original hats. Parents and children took part in each group, and I, as a parent and teacher, decided to take part too. We were cleaning the balcony at home over the weekend and came across some ceiling tiles, and this is how it appeared unusual idea hats, consisting of napkins and ceiling tiles. We present to your attention our master class for making crafts from napkins – original hat.

Material for production hats: ceiling tiles, scissors or a stationery knife, stapler, paper napkins (can be of any color as desired, Titanium glue

Let's start production "roses". "Roses" we'll make it out of folded ones paper napkins. Take a napkin and fold it into four. Secure it in the middle with a stapler.

Let's start production hats from ceiling tiles. Cut out a large circle and a small circle.

Let's start gluing them together.

Then we start decorating our hats"roses".

So it turned out interesting hat!

Publications on the topic:

In our kindergarten there is a long tradition: giving gifts or cards not only to mothers and grandmothers, but also to the kindergarten staff.

From February 29 to March 4, our preschool educational institution held a competition among parents (legal representatives) “The most original hat” as part of the celebration.

Our kindergarten often hosts various competitions in which children and parents actively participate. IN senior group ours.

Abstract of the GCD “Original photo frame for a portrait” preparatory group Goal: To arouse children's interest in design activities Objectives: Developmental - To introduce children to the professions of a photographer, fashion model, designer;

At school, the teacher gave my daughter an assignment to complete a feeding trough at home with her parents. performance in free interpretation, fantasy immediately became.

March 8 is one of the favorite holidays in our country. The first person we love in life is, of course, our mother. This love, the most natural.

The spring holidays are over. Now you can relax a little and ask yourself the question: who is the music director) Not enough.

Often on holiday events we use a nature theme. here and this time on spring holiday By March 8th, we were preparing a costume.