Crochet bat sleeve. Pullover bat knitted

Style for sweatshirts " bat» - one of the most advantageous for any figure. Interesting decor with large rhinestones attracts attention.

Sizes: 36/38 (40/42-44/46)
Description of knitting sweaters for size 40/42 they are in parentheses in front, for size 44/46 after the dash. If only one number is given, it applies to all three sizes.

You will need: 600 (650-700) g pink (col. 36) Lana Grossa CASHSILK yarn (40% polyamide, 30% bamboo, 15% cashmere, 15% silk, 75 m/50 g); straight knitting needles No. 6.5 and No. 7.5; beige rhinestones of different sizes.

Knotted edge: Slip 1st stitch of each row as knit. Last loop Knit each row. All details are knitted with a knotted edge.

Rib: alternate knit 1, purl 1.

Facial surface: faces. r. - persons p., out. r.-iz. p.

Selected decreases: at the beginning of the row after the 6th stitch, knit 2 stitches together with a broach (= slip 1 stitch as knit, 1 stitch and pull it through the removed loop). At the end of the row, before the last 6 stitches, knit 2 stitches together.
Highlighted additions: at the beginning of the row after the 6th stitch, at the end of the row before the last 6 stitches, cast on 1 person each. cross. from a cross thread.
Knitting density. Persons satin stitch, knitting needles No. 7.5: 14 sts and 23 r. = 10 x 10 cm; elastic band, knitting needles No. 6.5: 15 sts and 23 r. = 10x10 cm.

Attention! The pullover consists of 2 parts knitted crosswise. Arrow on pattern = knitting direction.

Description of knitting a sweater with knitting needles:

Front with 1/2 sleeves: start with the right sleeve. To do this, cast on 20 sts on knitting needles No. 6.5 and knit with an elastic band, starting with 1 purl. r. and after chrome. from 1 person., at the end of the row before the edge. finish 1 purl. On the right side, add sleeves for bevel in the 6th row. from the start of work 1 p., then in every 6th p. 5 x 1 p. and in every 4th p. 18 x 1 p., performing the highlighted additions = 44 p. After 53 cm = 121 r. from the start of work the sleeve is finished. Make a mark and continue knitting as follows: on the right side, knit on the first 6 sts. stitch and on the remaining 38 sts continue to knit with an elastic band, then in every 2nd r. knit 1 time for 6 stitches, 6 times for 4 stitches and 1 time for 2 stitches more knits. satin stitch At the same time, from the mark, cast on 13 sts for the front on the right side, then in every 2nd p. 2 x 13 p. = 83 p. Knit only knit stitches on front stitches. satin stitch On the hinges of faces. knit satin stitch with knitting needles No. 7.5, on elastic loops with knitting needles No. 6.5. When the number of elastic loops reaches 6 sts (= shoulder and neckline), knit on all loops with knitting needles No. 7.5. After 8 (10-12) cm = 18 (24-28) r. from the end of the sleeve, decrease 1 p. for the neckline on the left side, then in every 2nd p. 5 x 1 p., performing highlighted decreases = 77 p.
Then knit straight. After 13 cm = 30 r. from the beginning of the neck the middle of the front has been reached.
From here, knit the piece symmetrically and instead of decreasing, make increases and vice versa.

Back with 1/2 sleeves: knit as before.

Assembly: sew the seams of the sleeves and shoulders at 61 (63-65) cm. Then sew the side seams and the bottom seams of the sleeves. Distribute the rhinestones along the front according to the photo or according to the pattern and sew on.

Bat pullover knitted in an interesting pattern

Knitted pullover with dolman sleeves, textured pattern and elasticated waist

Dimensions: S/M, L and XL.
Material: yarn SCHULANA Country (100% sheared wool, 50 g = approx. 90 m): 700/750 g melange color: lilac/camel hair/Burgundy wine/spruce/dark blue, needles size 4 ½, 5 and 6 ½ , circular knitting needles No. 6 ½, 50 cm long.

Rubber: Using knitting needles No. 4 ½ and 5, knit, according to the pattern, alternately 2 persons. loops, 2 p.
Facial surface: using 6 ½ knitting needles, knit in knits. rows of faces. loops, in purl. rows - purl, in a circle only faces.

Pattern in rows:
First row - knit: edge loop, *slip 1 loop, back thread, 1 knit loop, 1 yarn over, pull the removed loop over the knitted loop and yarn over*, repeat until the end of the row, edge loop.
Second row - purl: edge loop, knit all loops purl, at the end edge stitch.
Third row: edge stitch, knit 1, * remove purl 1 loop, thread behind work, knit 1, 1 yarn over, pull the removed loop over the knitted one and yarn over *, repeat until the end of the row, knit 1, edge loop.
Fourth row: edge, knit all loops purl, edge.
Complete 4 rows, then repeat.

Circular knitting pattern: Using knitting needles No. 6 ½, knit on an even number of stitches.
The first circle is a sample: * remove 1 purl loop, thread at the back of the work, 1 knit loop, 1 yarn over, pull the removed loop over the knitted one and yarn over *, repeat until the end of the circle.
The second round is intermediate: knit all loops.
Third circle: k1, * remove 1 loop from the back of the work, 1 knit loop, 1 yarn over, pull the removed loop over the knitted one and yarn over *, repeat until the end of the circle, 1 knit.
Fourth round: knit all stitches.
Perform 4 circles, then repeat them.

Decrease loops: edge loop, 2 knit stitch, then knit 3 together with a slope = 1 loop is removed as a knit stitch, knit the next 2 loops together and pull the removed loop over the knitted one.
Before the last three loops, knit 3 loops together, k2. satin stitch and one edge stitch.
Thus, 2 loops will decrease on both sides.

Knitting density: Using knitting needles No. 5, knit 17 loops x 24 rows of elastic = 10x10 cm, using knitting needles No. 6 ½ knit 17.5 loops x 20 rows of pattern = 10x10 cm.

Pullover bat knitted, description:

Back: Cast on 86/94 stitches on size 5 needles.
To get a high rib, work 12 cm = 29 rows, starting from purl. row.
In the first purl. row after the edge loop knit 1 purl, at the end of the row before the edge loop there is also 1 purl.
Then switch to size 4 ½ needles. At a height of 10 cm = 24 rows after changing knitting needles. knit row, evenly cast on 24/16 loops from the transverse thread and knit them crossed = 110 loops.
Then 1 purl. row to complete purl loops.
Use knitting needles No. 6 ½ to knit a pattern. To give the pullover a special shape (bat) on both sides in every second row, cast on an additional *2 times for 1 loop and 1 time for 2*, repeat 3 times, then 12 more times for 1 = 166 loops.
Include the loops cast on both sides sequentially into the pattern.
At a height of 27 cm = 54 rows from the beginning of the pattern, make marks and, to bevel the sleeves, decrease 2 loops on both sides, then in every second row, decrease 2 loops 13 times = 110 loops.
Leave 3 loops on each side for shoulder seams and knit a pattern on the remaining 104 loops, ending with an edge loop.
At the same time, on both sides to bevel the shoulders, close 3 loops, then in every second row 1 time 5, 1 time 6 and 2 times 8 loops.
Set aside the remaining 44 stitches for knitting a collar.

Before: knit in the same way as the back.

Sleeves: Cast on 44/48 stitches on size 4 ½ needles.
Knit rib starting from purl. row.
In this row, after the edge loop there are 2 purl stitches. loops.
At the end of the row before the edge - 2 purl. loops.
On both sides for mowing, in the twenty-first row from the beginning, cast on 1 loop, then in every tenth row 3 times 1 = 52/56 loops.
Add the cast-on loops sequentially to the pattern.
At a height of 15 cm = 36 rows from the beginning of the set, change the needles to No. 5 and continue working.
At a height of 30 cm = 72 rows, close the loops as they appear.

Assembly: Stretch the parts, moisten and leave to dry.
Sew the side seams, not reaching 13/12 cm from the end of the elastic, then leave 14/15 cm open between the marks, according to the pattern.
Seams one-piece sleeves work up to the set aside stitches and sew the seams of the free-standing sleeves.
On needles No. 6 ½ on the right side of the product, cast on 6 set aside loops (3 back, 3 front). On both sides, pick up 1 purl. and 1 edge loop = 10 loops.
Then knit the loops in each row as they appear, while in the first row the 2 middle loops are knitted together. = 9 loops and knit a strip of 18 cm.
Then bind off 2 loops on both sides = 5 loops and set the loops aside.
Connect the strip to the back and front.
On the left side knit in the same way.
On circular needles No. 6 ½ along the neck line, pick up 44 loops in the back and front and the remaining 10 loops = 98 loops.
Then knit in the round (see pattern on circular needles) to create a double stand-up collar.
At a height of 12 cm = 24 rows, knit 4 cm in stockinette stitch on all stitches.
Then close all the loops.
Fold the collar in half, turn it inward and sew.
Sew on the sleeves, while slightly stretching the top edges.

36/38

YOU WILL NEED

Yarn (61% cotton, 38% polyester, 1% metallic polyester; 90 m/50 g) - 600 g color. ecru; knitting needles No. 4.5; 10 brown flower-shaped buttons; 10 roses color. ecru.

PATTERNS AND DIAGRAMS

FACIAL SMOOTH

Facial rows - facial loops, purl rows - purl loops.
In circular rows, knit all stitches.

STRUCTURAL PATTERN

Knit according to the given pattern. Distribute the loops as described in the instructions. Constantly repeat the 1st–24th row. Pay attention when increasing: “braids” and stripes with crossed loops are performed only after enough loops have been cast for these patterns; before that, the loops are knitted with purl stitch.

KNITTING DENSITY

18 p. x 28 r. = 10 x 10 cm, knitted in stockinette stitch with knitting needles No. 4.5.

ATTENTION!

The model consists of two identical parts, connected in the transverse direction from one sleeve to the other.

PATTERN

GETTING THE WORK DONE

BACK

Cast on 38 stitches and, starting from the purl row, knit 5 rows for the placket. in stockinette stitch, in the next row knit: * purl 2 stitches together, 1 yarn over *, from * constantly repeat = fold, then knit 6 rows again. facial stitch.

After 30 r. = 10.5 cm of the structural pattern, begin to increase along the left edge, while including the added loops in the pattern: add 1 p., in the next 6 p. another 1 p., then in every 4th p. add 2 x 1 p., then in every 2nd r. 16 x 1 p., 6 x 2 p., 1 x 4 p. and 1 x 18 p. = 92 p.

After 156 r. = 56 cm of structural pattern, the piece is knitted to the middle.

Work the second half symmetrically, then bind off the loops.

BEFORE

Knit like a back.

ASSEMBLY

Sew the top seam of the sleeve only at 12 r. strips, turn the sleeve strip along the fold inward and sew.

Along the upper edges, mark the neckline at the middle 30 cm. Top edges fasten the sleeves with buttons in the shape of flowers, for which sew 1 button to the neck, 1 button above the sleeve placket, distribute the remaining 3 buttons at equal intervals, and sew a rose on each button.

Sew side seams and bottom sleeve seams.